Roll over image to zoom in Click on image to zoom

Ride Warpig 2026

Name: Ride Warpig 2026
Brand: Ride
SKU: RD251036002
Price: 949.99 AUD
Availability: InStock

PREORDER

Size: Small 148cm Size Chart

Choosing the right snowboard size can be difficult, and if you ask a couple of mates (or the internet) what size to go for, chances are they're going to be wildly different answers. Here at Melbourne Snowboard Centre, we have come up with a simple solution to finding your perfect board size.

Firstly, try not to get overwhelmed by all the tech talk of cambers and flex ratings, there's so much information out there but initially you need to consider four main points: weight, height, ability and where you spend your time riding.

Most manufacturers give a recommended rider weight for each snowboard in their range. We have tried to include this data on all of our snowboard pages to make it easier for you to consider your options and find the right board. The range is really only a suggestion and if you find yourself outside the range, that's fine too. It also comes down to personal preference; if you find yourself below the range the board may feel a bit stiffer, and if you're above the range you might find it rides a bit softer.

Weight & Height

If this is the first board you're purchasing and you previously hired, you'll be used to the rental place sizing you up and putting you on any board that falls roughly anywhere from your chin to your nose. This is fine for an average height/weight rider however, it doesn't take into consideration the most important factor when choosing the correct size snowboard, your weight.

When you're riding your snowboard, you're using your weight to control the board. Weight determines how the board will flex, after all, your board responds to the weight that's on top of it and not how tall you are. This is why we always recommend choosing a board on weight and height rather than height alone.

Where You Ride

This is important because some styles of riding require longer or shorter boards. If you spend more time in the park it is helpful to size down slightly to make quicker turns, faster spins and have more control while buttering through boxes and rails. If you prefer chasing powder and traveling overseas you may want a slightly longer board, the added surface area will help you float above the snow much like a surfboard in water. Typically for the average rider in Australia we recommend a slightly smaller board compared to what we might recommend to someone traveling overseas.

Below we have made a chart that will assist you in figuring out what snowboard size is right for you. As long as you fit inside the board size range you shouldn’t notice too much of a difference:

Weight (kg)	Average Board Size (cm)	Board Size Range (cm)
27	95	90-100
32	110	105-115
36	120	115-125
41	130	125-135
45	138	135-140
50	141	138-144
54	143	140-146
59	146	142-148
63	147	144-149
68	149	146-152
73	151	148-154
77	154	151-157
82	155	152-158
86	156	153-159
91	158	155-161
95	160	157-163
100	162	158-165
105	163	159-167
110	164	160-168

If you are still having trouble figuring out what size snowboard to ride, come visit the shop and we would be happy to go over it with you. If you aren’t near Melbourne you can also email any questions or call us on (03) 9470 1822.

When Snowboards say that they are WIDE it generally means they are for riders with a boot size of US 12 or bigger. This is a very generalised way of thinking and the true answer lies with the waist width of the board.

We have tried to include waist width's on all our snowboard descriptions to make it easier to figure out if you need a WIDE board or a MID-WIDE board. Below is a chart which converts the waist size to shoe sizes. It is always best to double check the waist size of the board before automatically trusting company's definitions of WIDE. Unfortunately some companies will exaggerate what is a wide, mid-wide or normal width snowboard.

Wide Board: 260mm+ waist width

Great for guys size 12 boot (US) and bigger

Mid-Wide: 255-260mm waist width

Great for mens 10-12 boot (US)

Normal: 245-255mm waist width

This is where the majority of board sizes sit. Guys with US boot size 8-10 should avoid wider boards. Also Women with size 10 boots can also ride these boards.

Narrow: 235-245mm waist width

This is the size of the majority of women's boards. Some mens boards also fall into this category and can be ridden by men with US size 8 shoe and smaller or any womens boot size.

Do I have to ride a wide board if I have bigger feet?

You should always try to match your shoe size to the width of the board. Ideally you want a bit of your boot to hang over the board on each side so you can leverage your board from toe-side to heel-side. If it hangs over too much your toes and heels will catch the snow and knock you over. If your feet don't hang over enough you will have to work much harder just to tip the board on edge.

Can women ride mens snowboards? Can men ride womens snowboards?

Surprisingly this happens more with girls than with guys. They'll get given a hand me down from a guy that is way too wide and stiff for their weight and strength. The construction of men and womens boards are different for a reason and womens boards are generally slightly softer than mens boards. Riding a board that is too wide and too stiff will mean it is more difficult to get the board up on an edge. You can easily avoid a situation of riding the incorrect board size by following our Snowboard sizing guide.

Weight (kg)	Average Board Size (cm)	Board Size Range (cm)
27	95	90-100
32	110	105-115
36	120	115-125
41	130	125-135
45	138	135-140
50	141	138-144
54	143	140-146
59	146	142-148
63	147	144-149
68	149	146-152
73	151	148-154
77	154	151-157
82	155	152-158
86	156	153-159
91	158	155-161
95	160	157-163
100	162	158-165
105	163	159-167
110	164	160-168

Variant

Price:

$949.99

Quantity:

Estimated Availability: May 1, 2025

The 2026 Ride Warpig has quickly become one of the most popular and searched for snowboards every year and is isn't slowing down anytime soon. The shorter, wider construction of the Warpig is meant to be sized down shorter than your regular all mountain board, but still dominates the mountain with supreme stability and float with perfect agility and playfulness. Take it in the powder for surfy, slashy fun, take it in the park for some freestyle performance, or take it on the groomers for some hard and fast carves. Featuring a long list of tech that makes this board smooth, durable and super fun to ride, the Warpig is a battle-hardened tool of destruction poised to take on anything.

Board Type: All Mountain

All Mountain snowboards are versatile boards that excel across various terrains, from groomed runs to off-piste. These boards offer solid edge control and responsiveness, making them a great option for riders who want one board to do just about everything.

Flex: Mid

Offering a balanced blend of flexibility and stiffness, mid-flex boards are versatile and suitable for all-mountain riding. They provide enough responsiveness for carving while maintaining some forgiveness for playful or casual riding.

Ability Level: Intermediate

Intermediate snowboards offer more responsiveness and stability at higher speeds, with a slightly stiffer flex for better control on varied terrain and more advanced manoeuvres.

Shape: Tapered Directional

A tapered directional snowboard features a shape where the tail is narrower than the nose, providing enhanced control and stability in deeper snow. This design improves floatation in powder and allows for smoother turns, making it ideal for freeride and backcountry riding. While it excels in one direction, the taper helps the board naturally guide you through challenging conditions.

Camber Type: Directional Zero Camber

A directional shape featuring a flat zone underfoot with extended rocker in the nose and tail.

Width: Standard

Standard width boards deliver exceptional edge-to-edge quickness and responsiveness while providing enough platform space for riders with average boot sizes.

Sidecut: Tapered Bi-Radial Sidecut

A sidecut that offers the underfoot width of a wide board while maintaining the tip and tail width. This design enhances leverage on landings, improves grip through turns, and provides stability on a flat base.

Inserts: 2x4 Inserts

These offer a tighter hole pattern, allowing for more precise stance adjustments. They're common on modern boards and ideal for riders who want fine-tuned positioning and can be used with any binding with a standard or mini disk.

Board Construction

Topsheet: Topless Topsheet

Topless Construction eliminates the need for a topsheet by transferring graphics directly to the fiberglass. This process enhances durability, reduces weight, and minimises raw material usage.

Laminate: Hybrid Glass, Carbon Array 3, Double Impact Plates

Triaxial fiberglass on top and biaxial on the base, providing balanced torsional flex and stiffness for improved response at high speeds.

This power distribution technology ensures complete board control at every stance position. Three carbon stringers, strategically placed in the binding zone, collect input from any stance width and pressure angles. Rider input is efficiently directed to the opposite contact point for optimal board control.

Two layer urethane weaves placed beneath each binding area enhance compressive strength, preventing board breaks where it’s needed most.

Core: Performance Core

A blend of high-strength Aspen and Bamboo wood creates the ideal balance of strength.

Sidewall: Slim Walls

The next level of Roll-in Construction, pushed to its extreme. By integrating a fully 3-D composite structure over the Slimewall material, this technology enhances energy transfer efficiency, reduces weight, boosts durability, and improves damping.

Base: Sintered, Stone Ground Base

This base is created by heating and compressing small polyethylene particles, forming a porous structure that absorbs wax efficiently. As a result, the board glides smoothly and quickly on snow. Sintered bases are known for their toughness, durability, and speed. Ride uses a premium 4000 PTEX material for its sintered bases.

Edges: Cleave Edge Steel

With nearly 50% more steel, these edges offer unparalleled resistance to cracking and can be detuned to larger radii, providing greater durability.

Additional Features:

Thin Con - All Ride boards are designed with Thin Construction, featuring tapered tips and tails. This design reduces swing weight, improves tip flex, and boosts overall durability.
Bio Resin - A plant-based epoxy used to bond the layers of snowboards, crafted from renewable resources like vegetable oils instead of petrochemicals. This eco-friendly resin helps create snowboards with a reduced carbon footprint.

Size (cm)	Waist Width	Sidecut Radius	Tip/Tail Width	Insert Location Back	Ref. Stance	Rider Weight (kg)
X-Small 145cm	250	4.6/-/5.6	301/291	0	483	27-73
Small 148cm	260	5.1/-/6.2	311/301	0	523	45-93
Medium 151cm	265	5.4/-/6.5	316/306	0	559	59-95
Large 154cm	270	5.6/-/6.9	321/311	0	559	64-100+
X-Large 158cm	277	5.9/-/7.2	328/318	0	584	77-100+

All measurements are in millimetres otherwise stated.

CLICK HERE TO DOWNLOAD RETURN FORM

We are confident in our products and our sales staff to make sure that you get the best help and the gear that is most suitable for your adventures.

We are a local, independently owned store and do not offer ‘change of mind’ refunds for returned items (this includes incorrect sizing), however we're happy to offer you a store credit or exchange subject to the following conditions:

The item is returned within 30 days from the date of purchase (or date of delivery for online orders).
Proof of purchase included
The item/s must be returned in the condition you received it and with the original box and/or packaging in resalable condition, including manufacturer tags where applicable. It is the customers responsibility to ensure all returned items are delivered to Melbourne Snowboard Centre in their original condition.
We cannot offer returns on any Facemasks, Neckwarmers, Socks or Chains due to hygiene and the nature of their use.

Store credits, lasting up to 3 years, will be issued for the amount paid at time of purchase for the particular item being returned. They are issued via email in which you'll receive a 13 digit code that you can use at checkout online or in store.

Unfortunately stock levels vary and we are not able to stock all products in all sizes, which may result in your desired exchange product or size not being available. In the event that your desired exchange product is not in stock, a store credit will be issued.

Should you not want a credit or exchange, in extenuating circumstances Melbourne Snowboard Centre may issue a refund minus a 20% restocking fee.

If your return is time sensitive, our regular returns policy applies and no refunds will be given if you purchase new items prior to returning original items.

HOW TO RETURN

Making a return is easy. Please follow the steps below to make the process quick and easy for everyone.

Fill out & print the following form RETURN FORM. If you are unable to print the return form, a handwritten note with all requested information will suffice. Please note, online purchases can be returned in store at 392 Plenty Rd, Preston, with proof of purchase.
Take the time to carefully package your returns.
It is the responsibility of the customer to pay costs related to the repair of returned items damaged in shipping due to improper packaging, or the return may be rejected.
If returning a product in its box, please wrap the box to protect it prior to taping and avoid attaching shipping labels directly to the box.
Failure to do so may incur a fee or a reduced value in your store credit.
Send parcel to the address labelled on the return form.
Ensure the return form is included inside the parcel.
Once we receive the item via post we will process the store credit to your email. With the store credit, you can repurchase the correct size/item or alternative product of your choosing.

Please note:

Exchange requests are not held. If your exchange request is not available our team will issue you with a store credit.
Customers are responsible for all return postage costs.
We'll endeavour to have your store credit processed and emailed to you, within 24 hours of receiving your product back in store
If you have received an incorrect or faulty product please contact us so we can rectify the issue asap.
Store credits can not be returned and are not redeemable for cash
Parcels lost in transit to Melbourne Snowboard Centre are the responsibility of the customer, please keep note of your parcels tracking number
If exchanging an order and the order value is over $100, Melbourne Snowboard Centre will ship the exchanged item to you at no extra cost. Any additional exchanges will incur a shipping fee of $10, and additional returns will incur a reduction of $10 in your store credit.
No returns on clearance items.

How Your Return Should Be Packed

We require all items be returned in their original, sellable condition. All returns must meet the below criteria:

Unworn/unused and in their original condition
All tags attached
Returned in their box with all packaging (if boxed)
Returned with box and packaging intact and unmarked
No tape, labels, stickers etc. stuck onto the box or product.

When returning, please ensure you take care to protect the item and its original packaging. Damaged packaging or damaged products may result in a reduction in your credit, or a refusal of your return. Refused returns incur a minimum $10 return shipping fee (more for bulky items).

An example of how your boxed return should be packed:

An example of how your boxed return should NOT be packed:

Faulty or Damaged Products

If you have received a faulty product or you feel the product you have been using is eligible for a warranty evaluation by the manufacturer due to defect in its materials or workmanship, contact us and we can walk you through the appropriate steps to lodge a warranty claim. Please include photos of the item and issue so we can expedite the process. Find out more on our warranty page. 

If you have received a damaged product (eg. damaged in transit), please send photos and a description of the damage within 7 days of receipt to web@melbournesnowboard.com.au, along with your order number and contact details. Damaged product claims do not apply after the item has been used.

Returning a Snowboard Package

Our packages are discounted to help you get on snow at a reasonable price. Due to this, if you get the wrong size we are happy to offer an exchange in size of the same product, but we do not accept returns for individual package items. If you would like to return one or more items in a package but not all items, you must return the entire package and re-purchase the remaining item at its advertised price.

If you've bought a package online and would like to return one or more items but not all items, please email web@melbournesnowboard.com.au prior to return.